Hickory Curved Bar
Click Image to Enlarge
|
|||||
 Corbels with a hand carved grape design are installed not only for charm, but they will help hold up the hickory top. |  The bar walls are now stained and finished with three coats of a catalyzed lacquer. The floor is marked out 32" from the bar. |  Cork flooring is installed around the bar. Scrap peices are taped around the edge until the carpet and the transition strip is installed. |  Custom hickory cabinets will be built and installed in front of the framing. | ||
 The bar top is made up of two layers. The first layer is plywood screwed down to the bar walls and corbels. |  The second layer is solid hickory glued and fabricated to fit. This layer is screwed on to the plywood from the underside. |  The hickory top is cut short of the plywood edge so the custom arm rail will fit. |  The solid hickory arm rail is cut and installed with screws from the underside. | ||
 The lower top has been cut and installed over the custom hickory cabinets and two door cooler. |  The bar is almost complete. Doors will be added to the cabinet and the top needs to be stained and finished. |  Storybook pendant lights were installed to help give it the old time look. |  The bar has the old time rustic solid look we were hoping for. | ||
|
|||||
