Wine Cellar in Cedar Falls, Iowa
Details: Wine celler storage made with African MahoganyClick Image to Enlarge
Mahogany pieces are cut out for the wine racks |
Some parts are pre-assembled before finishing. |
The pockets for the wine bottles are made 3 1/2" square so various sized wine bottles will fit. |
The racks will be approximately 7' tall. Total wine bottle capacity approximately 300 bottles. |
This arched top display will sit on a hammered copper top over base cabinet. |
There will be approximately 10' of base cabinets with a hammered copper top, 6' of upper cabinets with glass doors surrounded by wine racks. |
The wine cellar is completely incased with concrete. Therefore, holes need to be cut through the concrete wall to allow intake and exhaust ducts to come into the room. |
From inside the wine cellar, the top hole is for the supply air, and the bottom hole will be for the return air. The cooling unit is located in the mechanical room just on the other side of the wall. |
A wine guardian room cooler is mounted in the mechanical room outside of the wine cellar |
The wine racks are awaiting installation. |
Hammered copper tops were chosen to cover the base cabinets. |
construction glue is applied on the wood top for the copper to bond to. |
